ويبربلوك فيكس

ويبربلوك فيكس

Ready-Mix Mounting & Gap-Filling Mortar

وصف المنتج

weberbloc fix is a ready-mixed cement-based mortar designed for laying regular and hollow concrete blocks, bricks, and stones, as well as filling gaps between concrete and brickwork. It is formulated with cement, graded sand, and selected additives to provide improved workability, adhesion, and water retention. Only the addition of clean water is required before use.

المزايا الرئيسية

• جاهزة للاستخدام وسهلة التحضير

• Good bonding and workability

• Suitable for blocks, bricks, and stone

• Good water retention

• High strength

• مناسب للاستخدام الخارجي

• Faster application compared with site-mixed mortar

• Helps maintain a cleaner and more consistent jobsite

الاستخدامات الموصى بها

مناسب لـ:

• Regular and hollow concrete blocks

• Brick masonry

• Stone masonry

• Filling gaps between concrete elements and brickwork

• Internal and external wall construction

البيانات الفنية

Composition: Cement, graded sand, and additives
Appearance: Grey powder
Mixed Density: Approx. 1.95 kg/L
Maximum Grain Size: Up to 4 mm
Recommended Joint Thickness: 1–2 cm
Pull-Off Strength at 28 Days: > 0.3 MPa
Compressive Strength at 28 Days: Approx. 13 MPa
Application Temperature: +5°C to +35°C

الخلط

Mix mechanically at low speed until a smooth, homogeneous mortar is obtained. Mix one 50 kg bag with approximately 7–8 liters of clean, cool water. Do not add excessive water.

التطبيق

The substrate must be clean, solid, and free from dust, oil, grease, and loose material. In hot weather, lightly dampen the receiving surface before application.

Apply the mortar to the blocks using a trowel, position the block firmly to ensure proper contact, check alignment and level, and remove excess mortar before it hardens.

المعالجة

Protect newly applied mortar from strong sunlight and wind. Cure with water for at least 3 days, spraying approximately 3–4 times per day.

التخزين

Store in the original unopened packaging, under cover and in dry conditions, protected from moisture, extreme temperatures, and direct sunlight.

Limitations

• Not suitable for bonding fresh concrete to existing concrete.

• Not intended for tile fixing.

• Do not apply on frozen or excessively hot substrates. 

السلامة

Contains cement. Avoid breathing dust and contact with skin or eyes. Wear suitable gloves, eye protection, and respiratory protection during mixing and application. The product is non-flammable.

Product Category: Premixed Mounting Mortar
Application: Interior & Exterior Walls
Pack Size: 50 kg